We have established ourselves as leading manufacturers and suppliers of Fuel Level Sensors in the market at present. These are specially designed to encapsulate permanent magnets inside them. These also traverse up / down or tilt outside or on one side of the sensor stem. These are made available to the customers at industry leading rates. Hermetically sealed reed switches are enclosed inside the sensor stem, which are actuated by the magnetic floats. Being compact in size these are used in small tanks and equipment. These are provided as per the set industry norms and guidelines.
Features:
Magnetic floats
Efficient sensor system
Reed switches Features
Compact Size for Easy Installation with IP-68 Enclosures
Low power consumption 0.6VA @ 24V DC supply for longer life.
Two wire 4-20mA output with 14-60 VD suitable for all industrial DC supplies with
Factory calibrated sensor for diesel / Easy calibration at site if required.
Application:
Free flowing homogeneous liquids, like oil, raw water, WFI, DM/DI water etc. Suitable for top mounting.
Process temperature max. 200°C.
Process pressure max. 20 bar.
Suitable for corrosive liquids.
Working Principle:
The probe forms a capacitance with the metallic tank-wall.
The capacitance is sum of three capacitance
C(air)=e(air) x P x (H - L)
C(material)=£(material) x P x L
C(residual) is due to device itself.
Where e(air) is the dielectric constant of air=1.
E(material) is dielectric constant of material.
P is constant of probe and installation, H is the active length of probe and L is the level of material.
Capacitance to level translation is performed with the aid of on-site calibration also called "wet-calibration"
The device stores a low level capacitance as level for 4mA and high level capacitance as level for 20mA as defined by the user. Features
Compact size.
Rigid rod/flexible rope versions.
Wide range industrial dc power supply (12 to 60 VDC).
Loop powered device (true-two wire).
No potentiometers - hassle free calibration.
Various customized process connections like Threaded/Flanged/Hygienic etc.
Water bed sensing for oil/fuel/fatty-acid applications.
Owing to a modernized infrastructure for trouble-free processing and post-production, we are instrumental in offering Two Wire Capacitance Continuous Level Transmitter.
Other Details:
Free flowing homogeneous liquids, like oil, raw water, WFI, DM/DI water etc. Suitable for top mounting.
Process temperature max. 200 °C.
Process pressure max. 20 bar.
Suitable for corrosive liquids.
Working Principle:-
The probe forms a capacitance with the metallic tank-wall.
The capacitance is sum of three capacitance
C(air)=e(air) x P x (H - L)
C(material)=£(material) x P x L
C(residual) is due to device itself.
Where e(air) is the dielectric constant of air=1.
E(material) is dielectric constant of material.
P is constant of probe and installation, H is the active length of probe and L is the level of material.
Capacitance to level translation is performed with the aid of on-site calibration also called "wet-calibration"
The device stores a low level capacitance as level for 4mA and high level capacitance as level for 20mA as defined by the user. Features
Compact size.
Rigid rod/flexible rope versions.
Wide range industrial dc power supply (12 to 60 VDC).
Loop powered device (true-two wire).
No potentiometers - hassle free calibration.
Various customized process connections like Threaded/Flanged/Hygienic etc.
Water bed sensing for oil/fuel/fatty-acid applications.