Manufacturers, Suppliers,Ahmedabad,India
West India Chemical International
Ahmedabad, Gujarat, India

West India Chemical International

Pl. No. 31, MeghparBorichi, Anjar,Ghandhidham Road
Ahmedabad - 370201 India

P: + 02836651122
M: + 02836280247 + 09594934367
West India Chemical International » Maintenance & Tank Cleaning Chemical

Maintenance & Tank Cleaning Chemical

 
Our product range includes a wide range of Maintenance Chemical such as Bitumen Emulsifier, Degreasing Chemical, T-Pol, Degreaser HD, Balast Tank Cleaner, Air Cooler Cleaner and many more items.Leading Manufacturer and Supplier from Navi Mumbai, our product range includes Tank Cleaning Chemical such as Tank Clean HD, Sea Cleaner, Alkaleen Safety Liquid, Chembreak Emulsion Breaker, CTC VOLC Cleaner, New Org and many more items.
RXSOL-20-2054-025
tank cleaner Its typical use as a tank cleaner or for general decreasing, cleaning and gs freeing for double bottom tanks, wing tanks, pipe lines, fuel oil tanks This can be beneficial as part of the initial cleaning process after the carriage of Lube oils and Lube oil additives. As soon as the tank in question has been checked empty by the attending surveyor, RXSOL-20-2054-025 Plus should be sprayed over all surfaces which are safely reachable. irst of all drain off any remaining oil from Heat Exchanger. 2) Connect the discharge side of a portable pump to the lower heat exchanger connection & the suction Side of the pump to the bottom outlet of a 200 liter drum. 3) Complete the circuit by connecting the upper connection on the heat exchanger to the top of the drum. 4) Maintain the bath temperature between 60-80 0 C throughout the cleaning operation. If it is not possible to heat, the operation will need to be extended. It is cost effective, easy to apply and use. • High emulsification on mineral oils and petroleum based chemicals. • Safe to use on most metal surfaces, painted surfaces and tank coatings. • Cleans oil coolers, fuel oil pre heaters and lube oil heat exchangers. • Removes general oil contamination from machinery and engine room. • Economical cost effective 5) Use the pump to maintain circulation for 12 to 15 hours. When the cleaning is completed, disconnect the lower heat exchanger connection and drain out the cleaning solution. 6) Connect a fresh water supply to the upper heat exchanger connection, and rinse until the water runs clean from the lower connection. When rinsing is complete, disconnect the water supply and thoroughly drain and dry the heat exchanger
Features
  • High emulsification on mineral oils and petroleum based chemicals.
  • Safe to use on most metal surfaces, painted surfaces and tank coatings.
  • Cleans oil coolers, fuel oil pre heaters and lube oil heat exchangers.
  • Removes general oil contamination from machinery and engine room.
  • It is cost effective, easy to apply and use.
  • Use the pump to maintain circulation for 12 to 15 hours
  • Complete the circuit by connecting the upper connection


RXSOL-16-1045-025
Rig wash citrus RXSOL-16-1045-025 is a heavy duty emulsifier based cleaner , specially formulated for all types of water condition even with HARD WATER and for use with high presure cleanig machines. Ideal for difficult cleaning problems faced in industrial and other plants. Its grease CUTTER and wetting agents ingredients makes This product excellent chemical cleaning action and does an excellent job without leaving any film or residue to recollect dirt, grease or grime .
Features
  • It is a heavy duty emulsifier based cleaner , specially formulated for all types of water condition even with HARD WATER and for use with high presure cleanig machines.
  • Ideal for difficult cleaning problems faced in industrial and other plants.
  • Its grease CUTTER and wetting agents ingredients makes This product excellent chemical cleaning action and does an excellent job without leaving any film or residue to recollect dirt, grease or grime .
  • acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance use in tank cleaning or general degreasin of engine rooms, cargo hold, refrigerated rooms etc


RXSOL-16-1044-007
Rig wash powder Very effective and suitable for DEGREASING and for manual wash . Formulated with with Emulsifier, Softening agent and pleasant fragrance to ensure complete clean surface. This product is also containing corrosion inhibitors to fight against rust .
Features
  • Highly concentrated and active Biodegradable Ingredients and economy.
  • Non Toxic & Easy rinsing
  • Stains Removing Agent


RXSOL-16-1014-025
Rig wash liquid Rig Wash and pressure cleaner is for all temperature has a powerful and fast wetting and penetrating action which enable it to remove heavy deposits of oil, dirt and grease from concrete or metal surfaces, vessel bilge decks, engine Room and drill floor etc Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance
Benefit
  • Remains stable at high or low temperatures
  • Can be used with steam cleaners or cold washers.
  • No clogged coils
  • No undissolved particles.
  • 100% water soluble in soft or hard water.
  • Non-flammable and biodegradable.
  • No harsh fumes in use
  • Ideal for use in wherever galleys, galleys, cabin, engine room, bilges, drill floors etc.
  • Non-corrosive does not attack metal surfaces, Contain-non caustic.
  • Compatible with oily water separators. Releasing the oil phase for reclamation. Suitable for all types of floors. Deodorizing nature


Degreaser HD Very powerful oil dispersing agents. Readily soluble in water in all proportions. It is non-corrosive to metal like copper, aluminium, mild steel and plastic. It is non-toxic which makes handling easy. Best for use as awash for fuel tankers, the offered degreaser is processed with inorganic, organic compounds by our talented professionals possessing years of experience. This degreaser is widely valued for safe usage and highly soluble as compared to other brand's products. The offered degreaser is examined before the delivery in order to assure its quality from our end.
Features
  • Readily soluble in water
  • Safe to use


RXSOL-10-1006-020
Dgreaser sb RXSOL-10-1006-020Mixture of Emulsifier, new technology surfactants (With high solvency and emulsification effect),Corrosion inhibitors, Rust preventive. due to free from caustic and Hydrocarbon very gentle on hands & ideal for cleaning Walls Wood works, Metals and all areas . Acts as superior quality cleaner / degrease. BIO DEGRADABLE. It is a unique formulation blended from inorganic, organic compounds and detrgents with powerful dispersing agents. Readily soluble in water in all proportions. It is non - corrosive to metal like copper, aluminum, mild steel, and plastic. It is no - toxic which makes handling easy.
Features
  • clean all types of metal surface
  • does not contain chlorinated
  • hydrocarbon
  • formulated to be very cost effective
  • non cost effective
  • eco friendly


ORG Boll clean 2000 Very use full to clean fuels recitation of paraffin and asphalt or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh. It is heavy duty emulsifying liquid , which is Extremely and effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators. Effective cleaning of fine meshes is achieved by soaking in RXSOL-16-1665-025 followed by blasting with compressed air using a cleaning gun.
Features
  • Effective cleaning
  • effectively removes
  • cleaning gun
  • heavy duty
  • emulsifying liquid
  • cleaning gun


RXSOL-10-1006
T-Pol With an aim to stand tall on the expectations of our esteemed clients, we are providing T-Pol. This range is a multipurpose cleaning soap solution & use to remove dirt. The offered range is processed with finest grade of chemicals as per the market standards. Along with that, our chemicals can be availed by us within the given time - frame at affordable price.
Features
  • Precise composition
  • Quick result
  • Universal cleaner for home, institutes, plant and machinery, compatible with all type of surfaces


RXSOL-20-2007
HCF RXSOL-20-2007-210 is a very strong low foaming cleaner, Especially formulated to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils,tug oil etc. It is low toxic product with an exceptional solvency power on soil & oily matter .It is free from hydrocarbon solvents and minimizes the extreme hazards to personnel in handling materials. Application: First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2007-210 is by direct injection followed by recirculation washing, using tank cleaning machines.
Features
  • Tank Lining– Stainless
  • / Epoxy / Phenoli


RXSOL-20-2040-025
Latex Remover Application: Use for Tank cleaning of Cargo tank, Tank Container and Storage Tank. Also use in workshop as a stripper to clean the lates from floor. Dose: 1. Butter worth the tank after discharge without any delay for 2 hours with warm fresh water and inject from the beginning on the RXSOL LATEX REMOVER. Make the solution of Rxsol Latex Remover 4-10% with water for tank cleaning procedures. Allow product to soak for 20 minutes and flash down with fresh water. Same for circulation method where time for circulation could be between 1-3 hours. An additional circulation could be necessary when deposits of Latex are quite heavy . Spray RXSOL LATEX REMOVER at ambient temperature and allow approximately 20 minutes activation time. The latex can then be removed with cold water by means of high pressure. If necessary, repeat this treatment. 2. Ventilate, mop and dry the tank. Some minor dried latex residues which could be present on heating coils and pump body have to be removed manually.Recommended preparations before loading and discharge of Latex: Prepare the loading/discharge connection directly at the pump stack of the respective tank and flange off the line to the manifold. Install a valve at this connection and use hoses for the shore connection (necessary length should be as short as possible). Close the drop line inside the tank by a flange or alternatively with wooden plug.If a plug has to be used cover this with plastic foil (at least 3 layers) and fix it with a stainless steel band. For loading and discharge use the deep well pump only. All other connections and openings inside the tank should be dismantled, flanged off or protected as described above (e.g. steam, nitrogen,vapour line connections etc.).Fixed tank cleaning machines should be dismantled and blinder flanged. Tank dome hatches and Butter worth hatches including gaskets should be protected with a plastic foil which has to be placed between the dome and the hatch. Before loading steam the tank with very low pressure (1 bar) to make sure that the bulkheads, tank top, bottom and the lines inside the tank are humid but avoid any heat up. All equipment that might come into contact with the Latex should be washed with fresh water so they are humid before the loading takes place.
Features
  • high pressure
  • Some minor dried latex residues
  • alternatively with wooden plug


Rxsol-20-0666
RXSOL 666 Rx sol 666 is surfactant base highly concentrate Product specially designed to clean Tank Container , Cargo Tank which are carrying Heavy Aromatic , hydrocarbon solvent and, natural Latex etc. Rx sol 666 due to strong concentration provides a quick penetration and powerful reaction to remove stubborn hydrocarbon and other organic deposits, from all type of surface. It is ideal Product to Clean Tank container, cargo Tank , latex Surface etc.


RXSOL-40-4012-025
antifreeze Liquid RXSOL-40-4012-025 We offer our prestigious clients the premium range of Cool Treat. Offers corrosion protection for closed cooling water systems, these cool treats are provided in several capacities & grades as per the customer’s requirements. The offered is processed with finest grade of material as per the market standards. Along with that, our cool treats can be availed by us within the given time - frame at affordable price. Features: •Balanced composition •Easy to use •Environmentally friendly Applications: •Liquid product, easy to use. environmentally friendly, fully organic product, low toxicity •Effective against cavitation and erosion •Superior heat transfer properties •Compatible with hoses, gaskets and seals •Compatible with glycol for frost protection •Stable product - non depleting •The product can be used for corrosion inhibition in many types of closed re-circulation system such as •Diesel engine cooling water systems - Compressor cooling water systems •Centralized cooling systems Hot water healing systems Auxiliary machinery cooling systems Using Method: •Rx Sol Cool treat is a highly effective corrosion inhibitor for all common metals in cooling water systems •Where most traditional inhibitors react with the metal surface and form oxides that prevent further corrosion •Cool treat applies a thin and durable layer of Protective molecules to the metal surfaces •This technology prevents the continuous build-up of insulating layers on heat transfer surfaces •For new builds, Rxsol recommends cleaning of the water system before commencing service •The system will always contain small amounts of oil and iron oxides, and this can be easily removed in •1 time with Pxsol Commissioning Cleaner. If the system Is corroded or is more heavily contaminated use Rxsol Degrease hd •Pxsol Safe Acid for removal of metal oxides or scale is recommended •For systems previously treated with other products, Wilhelm-sen •Ships Service recommend to drain and flush the system before refilling with distilled water and Cool treat •The system should be clean and free from scale and corrosion products when starting the treatment •The use of antifreeze is sometimes required if the vessel is to be laid up in cold areas •Cool treat can be used in conjunction with glycol for frost protection •If used in conjunction with glycol, It is recommended to increase the product concentration to 8% Dosing method: •Cool treat should be dosed to a suitable point in the system •If the expansion tank is used, adequate circulation must be assured Dosage and control: •Cool treat should always be present in a concentration of 5% or higher in the system. •It is good practice to start with initial dose for an untreated system of •Go liters of Cool treat ton, 5% will provide sufficient protection of the system for a period of two to five years under normal conditions provided •To prevent residual falling below minimum level due to loss of cooling water, •Wilhelm-sen Ships Service recommend to maintain a level of 6% Cool treat in the cooling system •The engine manufacturer's recommendations for water quality should always be complied with •Cool treat provides good protection even with contamination of the system by i.e •Inorganic salts.Maintain Chloride levels and other contaminants at a minimum level •Most engine manufacturers recommend a maximum of 50 ppm Chlorides Specifications: •Density: 1.06 •Packing type: 25 ltr •Color: Colorless •Appearance: liquid
Features
  • Balanced composition
  • Easy to use
  • Environmentally friendly





Contact Us

West India Chemical International

Pl. No. 31, MeghparBorichi, Anjar,Ghandhidham Road
Ahmedabad - 370201, Gujarat, India
P: + 02836651122
M: + 02836280247 + 09594934367

© Copyright 2017 West India Chemical International, India. All Rights Reserved